Stock for short：长盈通
Stock code：688143

CN OA
Home>Product Center>New Materials>Thermal Control Modules
Laminated Micro-channel Antenna Cold Plate for Liquid Cooling
The liquid cooling plate adopts a design of three-layer variable cross-section flow channel, which can effectively destroy the flow boundary layer, greatly improve the fluid turbulence in the channel and improve the heat transfer efficiency. The one-time high-temperature vacuum brazing technology is used for processing and forming, with high reliability and low cost.
The liquid cooling plate has the advantages of large heat transfer area per unit volume, low thermal resistance and high heat transfer coefficient, which can ensure that the temperature difference in different areas is less than 10°C under the heat source density of 100W/cm2, and can meet the temperature requirements of dual-frequency TR module for long time and high proportion operation.
  • Variable cross-section flow channel
  • Large heat transfer are
  • Integrated processing and forming
  • Improve heat transfer efficiency
  • Low thermal resistance and high heat transfer coefficient
  • High reliability and low cost
Hotline for consultation: +86-27-87981568
Online inquiry Download the product manual
Product CharacteristicsSpecifications
Product Characteristics
  • 01
    Variable cross-section flow channel
  • 02
    Large heat transfer are
  • 03
    Integrated processing and forming
  • 04
    Improve heat transfer efficiency
  • 05
    Low thermal resistance and high heat transfer coefficient
  • 06
    High reliability and low cost
Specifications

Width of flow channel

Working time

Upper junction temperature limit of device

Environment temperature

Water flow

Phase-change material

Latent heat of phase-change
0.2-0.5mm 500s <120℃ 70℃ 12g/s RK-80 270J/g